Foot Pedal Setup InstructionsSetup instructions for footpedals being used with Express Dictate v5.12 or later and Express Scribe v4.36 or later can be found here: These instructions might work with serial and gameport pedals from other manufacturers but probably will not work with USB pedals from other manufacturers. Also, if you find any other foot pedal controllers that work with Express Scribe or are a foot pedal manufacturer or reseller and would like to add your information to this page, please Contact Us. For details please see Writing a driver for an unsupported controller. ![]() Write your Own Pedal DriverIf you are a pedal manufacturer or distributor you can write your own pedal driver. AltoEdge pedals are compatible with Windows and Mac OS X. Again you will need to be handy with a soldering iron and refer to the wiring information listed on the Foot Pedal Control pages of the Express Scribe Help Screens. The AltoEdge USB foot pedal is the only pedal that can be used with the free version of Express Scribe. The wiring details are listed on the Pedal Wiring Instructions Page.Īlternatively, if you have pedals for old-style microcassette transcription units, the plugs can often be modified for only a couple of dollars. You then need a special cable to connect to your game or serial port. The pedals should cost around $US12 each. With a special cable you can use the Radio Shack (Tandy) Pedals (Radio Shack Item 44-610C). This is by far the cheapest option, but you will need to make your own cable/plug. ![]() Option 3Wire your own or modify an old-style pedal
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |